• Skip to main content
  • Skip to header right navigation
  • Skip to site footer
SyBridge Technologies

SyBridge Technologies

Bridging the gap between innovation and mass production

  • Capabilities
    • Design & Engineering
    • Rapid Prototyping
    • Tooling
    • Advanced Manufacturing
    • Supportive Injection Molding
    • Reliability Services
  • Technologies
    • 3D Printing
    • Urethane Casting
    • CNC Machining
    • Injection Molding
    • Manufacturing Intelligence
    • SyBridge Connect
  • Industries
    • Life Sciences
    • Health & Beauty
    • Consumer Products
    • Aerospace
    • Mobility & Industrial
  • Resources
    • Material Selector
    • Press Room
    • Knowledge Center
    • Events
  • About Us
    • Evolution
    • Sustainability
    • Careers
  • Contact
    • Locations
Home / Resources / Know Your Materials: Polystyrene (PS)

Know Your Materials: Polystyrene (PS)

August 5, 2021 by SyBridge Technologies
Polystyrene

Previously published on fastradius.com on August 5, 2021

Polystyrene, abbreviated as PS, most commonly comes in two forms — foam, also known as expanded or extruded polystyrene, and rigid, solid plastic. These two forms of PS do not exhibit the same physical properties and have different applications as a result. This article will focus on two common types of polystyrene that SyBridge offers, solid and molded polystyrene.

Solid PS is a naturally transparent plastic that is also lightweight and inexpensive to manufacture. These qualities contribute to polystyrene’s popularity across industries, ranging from household products to manufacturing and machinery. PS can be mixed with additives and blended or copolymerized with other plastics to improve its material properties. This also makes PS very compatible with injection molding.

What is Polystyrene?

Polystyrene can be a thermoplastic or thermoset material depending on its polymeric arrangement. Thermosets cannot be remelted after initial forming, but thermoplastics can be melted and reused many times over. For this reason, thermoplastic PS can be used in injection molding and subsequently recycled.

The two most commonly used kinds of standard solid plastic polystyrene are:

  • General-purpose polystyrene (GPPS): GPPS is a hard, brittle homopolymer that is naturally clear but can be colored. Think of a CD plastic jewel case.
  • High-impact polystyrene (HIPS): HIPS is opaque, much less brittle than GPPS, and contains a polybutadiene rubber impact modifier. It is typically used in household and food packaging.

Polystyrene Properties and Mechanical Specifications

Polystyrene is non-toxic, odorless, and lightweight, making it very popular for food packaging applications. It also has high impact strength and good dimensional stability.

Here are some of the typical mechanical specifications for high-impact polystyrene:

  • Ultimate tensile strength: 28 MPa
  • Elongation at break: 55%
  • Flexural modulus: 1930 MPa
  • Impact strength (notched): 107 J/m
  • Heat deflection temperature: 92°C

One disadvantage of polystyrene is its poor chemical resistance. While this quality makes PS long-lasting in natural environments, it also makes PS nonbiodegradable. Polystyrene will, however, dissolve somewhat rapidly when put in contact with chlorinated solvents and other hydrocarbon substances. Another key disadvantage of molded PS is its brittle nature.

Why Choose Polystyrene?

Polystyrene has incredible dimensional stability, enhanced by the material’s water resistance, which allows it to remain consistent in size and shape despite varying external conditions. Polystyrene is also FDA compliant, meaning it is certified safe for use with food and beverage. In addition, PS is inexpensive and readily available.

Popular Polystyrene Uses

Solid plastic PS is commonly used to make medical products like Petri dishes or test tubes, but it can also be found in common household products like yogurt containers, smoke detector housings, and red Solo cups. You can also find polystyrene in automotive and electrical components and electronics. PS’s transparency also makes it an excellent choice for optic applications like lighting fixtures.

Solid plastic PS is commonly used to make medical products like Petri dishes or test tubes, but it can also be found in common household products like yogurt containers, smoke detector housings, and red Solo cups.

Polystyrene can be used to create living hinges, which are also often made from polypropylene. Butterfly hinges and snap closures are far more easily thermoformed with molded polystyrene than polypropylene, and PS hinges keep their shape despite repeated movement.

Getting Started with Polystyrene

Polystyrene is a durable yet lightweight plastic with incredible customization opportunities. Boasting various types with their own unique benefits and applications, polystyrene components withstand stress well and remain dimensionally stable. When it comes to choosing the best PS form for a particular application, product teams must do their research – though making these decisions is simpler with the help of a trusted manufacturing partner like SyBridge.

At SyBridge, we leverage our years of manufacturing experience to help you confidently design and manufacture your products. We can offer you in-depth, unbiased information throughout every stage of the creation process, helping you achieve your most innovative designs. If you think solid or molded polystyrene is the right material for your next project, contact us and discover what’s possible.

Category: Knowledge CenterTag: Injection Molding, Materials

Related Articles

Polyoxymethylene (POM), more commonly known as acetal or its branded name Delrin®, is an engineering plastic offering low friction, high stiffness, and excellent dimensional stability. Polyoxymethylene is a category of thermoplastics and includes many different formulations of the material, all of which vary slightly. As such, it’s important to learn as much as you can about each type before choosing one for your next project. Delrin® is a semi-crystalline engineering-grade thermoplastic widely used to create highly precise parts. In general, Delrin® provides impressive dimensional stability and sliding properties. It’s known for its high strength, wide operating temperature range (-40°C to 120°C), and excellent mechanical properties. Here’s everything you need to know about this material, from how it’s made to its best-fit applications. Inside the polyoxymethylene production process Acetal was first discovered by German chemist Hermann Staudinger in 1920 before it was commercially synthesized by research chemists at DuPont, the original manufacturers of Delrin® plastic, in 1956. Like all other plastics, acetal is created by distilling hydrocarbon fuels down into lighter groups called “fractions,” which can then be combined with other catalysts via polymerization or polycondensation to produce a finished plastic. To make an acetal homopolymer like Delrin®, anhydrous formaldehyde must be generated by causing a reaction between aqueous formaldehyde and alcohol to form a hemiformal. The hemiformal is then heated to release the formaldehyde, and the formaldehyde is polymerized by anionic catalysis. The resulting polymer is stabilized when it reacts with acetic anhydride, which creates polyoxymethylene homopolymer. Acetal comes in many different commercial varieties and formulations, each with its own advantages and disadvantages. For example, Delrin® 500 is medium-viscosity, all-purpose polyoxymethylene that has a good balance of flow and physical properties. It can be used to produce parts via CNC machining and injection molding and is frequently used to manufacture mechanical parts, fuel systems, and fasteners. Delrin® 1700P, on the other hand, is a very low- viscosity, fast-molding resin that is best suited for parts with complex shapes, thin walls, long flow paths, or multi-cavity tools. It also offers the best molding thermal stability for deposit-free molding in demanding conditions. Since there are dozens of different formulations of acetal, it’s important to do your research and make sure your prospective plastic offers all of the properties you need for your application. Delrin® plastic properties and mechanical specifications small black Delrin pieces Delrin® can also be found in all-purpose industrial equipment like bearings, gears, pumps, and meters. Acetal’s excellent mechanical properties make it extremely versatile, offering a unique blend of properties that you won’t find in most metals or other plastics. Delrin® plastic is strong, rigid, and resistant to impact, creep, abrasion, friction, and fatigue. It’s also well known for its excellent dimensional stability during high-precision machining. Acetal can also stand up to moisture, gasoline, solvents, and a wide range of other neutral chemicals at room temperature. From a design standpoint, parts made with extruded POM naturally have a glossy surface finish. Since acetal is compatible with CNC machining, injection molding, extrusion, compression molding, rotational casting, and more, product teams are free to choose the manufacturing process that works best for their budget and their needs. However, it’s worth noting that Delrin® plastic is typically very challenging to bond. Acetal material properties vary by formulation, but the mechanical properties for Delrin® 100 NC010, one of the most popular formulations, include: Tensile modulus: 2900 MPa Yield stress: 71 MPa Yield strain: 26% Density: 1420 kg/m3 Charpy notched impact strength, +23°C: 15 kJ/m2 Coefficient of linear thermal expansion, normal: 110 E-6/K Water absorption: 0.9% Delrin® does have a few limitations. For instance, even though Delrin® is resistant to many chemicals and solvents, it’s not very resistant to strong acids, oxidizing agents, or UV radiation. Prolonged exposure to radiation can warp the color and cause the part to lose its strength. Also, this material isn’t readily available in a flame-retardant grade, which limits its utility for certain high-temperature applications. Why choose Delrin® plastic? These limitations notwithstanding, there are many reasons to choose acetal over other materials. When compared to other plastics, acetal offers better creep, impact, and chemical resistance, better dimensional stability, and higher strength. It also has a lower coefficient of friction. Acetal outpaces certain metals as well. Parts built with this material have a higher strength-to-weight ratio, better corrosion resistance, and offer more opportunities for part consolidation. You can build thinner and lighter parts faster and at a lower price point with acetal than with a comparable metal. Delrin® plastic can be found in almost every major manufacturing sector. In the automotive industry, common applications include heavy load-bearing gears, fuel system components, loudspeaker grilles, and safety system components like seatbelt hardware. Delrin® can also be found in all-purpose industrial equipment like bearings, gears, pumps, and meters. In the consumer goods and appliances space, this material can be used to make anything from zippers and pens to knife handles and lawn sprinklers. Getting started with Delrin® There’s a lot for product teams to love about Delrin®. It’s strong, stable, versatile, and its excellent mechanical properties make it a good choice for a wide variety of applications in a number of industries. However, with dozens of different formulations of acetal on the market, it can be very challenging to determine which one might be the best fit for your unique project. A seasoned manufacturing partner can help demystify the material selection process. When you partner with Fast Radius, you partner with a team of on-demand manufacturing experts who have years of experience helping product teams navigate material selection. We’re well-versed in the wide range of materials that can be used for both traditional and additive manufacturing — including Delrin®. Once you’ve selected the Delrin® formulation that’s the right fit for your application, our team of experts can help facilitate the entire manufacturing process — from design and prototyping to production and fulfillment. With a full suite of manufacturing services including CNC machining and injection molding, Fast Radius can bring your vision to life quickly and easily. Contact us today to get started.

Know Your Materials: Delrin (Polyoxymethylene)

MJF vs. FDM: What You Need to Know

Injection molding

Tips for Injection Molding With High-Temperature Plastics

CNC

Key Differences for Acrylic and Polycarbonate Machining

3D part

Key Considerations for 3D Printing with Nylon

Stacked plastic

Thin Wall Injection Molding Design Tips and Tricks

Ready to discuss your next project?

Connect with an expert

We Bring Ideas to Life

  • LinkedIn
  • Facebook
  • Instagram
  • YouTube

Global Headquarters

265 Spring Lake Drive
Itasca, IL 60143 USA

info@sybridge.com

+1 (833) 824-1116

Copyright © 2025 · Return To Top

  • Legal Information
  • EULA
  • Terms and Conditions​
  • Accessibility​
  • Privacy Policy
  • Sustainable Purchases Policy